Sliding Patio Doors Repairs

Your sliding glass patio doors to let in more light and increase your home's energy efficiency. As time passes, they could begin to show signs that require some attention.

Luckily, most of the issues with sliding patio doors are simple to fix. Find out more about how to keep your patio doors looking and operating like new:.

Tracks that are dirty or damaged

One of the most frequent causes of sliding patio doors that won't open is clogged or dirty tracks. Over time, dirt and grime of daily usage can accumulate on the track. This can cause the door jam or even break completely.

A regular cleaning of sliding glass patio doors repair doors and tracks in your household chores can help minimize this accumulation. Begin by cleaning large debris off the tracks. Then make use of warm water and non-abrasive cleaning products like dish soap to clean them. Add a little vinegar to your cleaning solution can also aid in the removal of stubborn dirt and grease staining.

If you notice that your sliding door still won't move smoothly after following these steps, it may be a sign of more serious damage that requires a professional repair or replacement. There are a few easy fixes you can make before calling a professional to avoid costly repairs or replacements.

Place a mat under your sliding doors. This will assist in trap dirt before it reaches the tracks. Regularly trim any plants or bushes that are near the sliding door to decrease the amount of debris tracked into the tracks. Close the door properly to ensure that you don't damage the rollers or wheels. By keeping your doors clean and lubricated you can prolong their lifespan significantly.

Rollers that are misaligned

Sometimes, a patio sliding may become out of alignment. Most often, this is due to obstructions such as dirt or other that can be easily fixed. Sometimes it's due to bent tracks or a bent roller. In this case it is possible to re-align the roller by removing them with their adjustment screws and then cleaning them using rubbing alcohol. Be careful when working with these parts, as they are fragile.

If your doors are sticking, you can lubricate the rollers. This will decrease friction and allow them to move more easily. It is recommended to use a silicone-based lubricant, since petroleum-based ones tend to attract dirt faster. It is also crucial to clean the tracks and rollers before applying lubricant.

After cleaning the rollers, you can put them back in place using the adjustment screws. It's recommended to make use of the same lubricant as you used to clean them. Be sure to push the rollers completely in their channels when reinstalling them. Then, you can check your door to see if it now slides effortlessly.

If the issue persists, it is possible to remove the door and examine the tracks and rollers. If the wheels or tracks are badly bent they may require you to replace them. In this case, it's a good idea to contact an expert to install the tracks.

Warped glass patio door repair

Sliding glass doors are great for bringing in natural sunlight and the outdoors into rooms, however they are also susceptible to damage that requires repair or replacement. Cracks, warping, and fading are some of the most common problems. Warping occurs when the materials which make up your sliding glass patio door begin to degrade due to sun, heat and other environmental elements. The most common cause of cracking is injuries caused by impact, like from a lawn mower or ball run-in, whereas fading typically occurs due to repeated contact with sunlight or other natural elements.

If your sliding patio doors aren't easy to close or open it could be a sign that the tracks and rollers aren't functioning properly. This could be due to the accumulation of dirt, rust, or debris in the track, wheels that are not aligned or a lack of lubrication. Cleaning the tracks and rollers by removing obstructions, and then applying silicone spray can help resolve this problem.

The locking mechanism may be faulty, making it difficult to open or shut your sliding patio doors. This could be caused by misalignment or wear and tear however, a simple fix is to adjust the locking mechanism by turning the adjustment screws hidden on the bottom of the track.

Drafts or air leaks around your sliding patio sliding door repair doors are a typical issue that can greatly reduce their energy efficiency. These issues are typically caused by weather stripping that has worn out or poor alignment of the door. This issue can be easily fixed by replacing the weather stripping and realigning your doors.

Loose Handle

It can be a hassle when the handle of sliding doors becomes loose. It becomes difficult to open the door. This is typically caused by an improperly aligned locking mechanism, which can be corrected by loosening the screws that hold it in place and then tightening them until they're snug against the jamb of the door.

Another common reason for a handle to become loose is that it is detached from the spindle that connects the interior and exterior handles. This is typically the result of a mix of factors, including over use or wear and tear or just general ageing. If the problem is not resolved promptly, it may eventually result in the entire handle becoming loose, and possibly falling off completely.

The best method to solve this issue is to start by finding the screws that join the interior and exterior handles. They are usually hidden by tabs made of plastic that can be removed using a flathead screwdriver (or in the case of certain handles, a Phillips head screwdriver). It's a good idea keep these screws safe so that you don't loose them.

After the handles have been removed the next step is to remove the loose spindle. This can be done by tapping the end of the spindle using a hammer until it is freed from its position within the door. The new handle is fitted by putting the spindle in the handle hole inside and the other end into the hole in the handle on the outside. Once the handle is in place, it can be tightened by screwing the screws back in and then examining to confirm that the locking and unlock mechanisms function correctly.

Afflicted Weatherstripping

Weatherstripping that's damaged or cracked may let air and water be able to seep into your patio door, causing damage to your home's comfort and energy efficiency. In addition to letting in moisture, it can also cause drafts and increase your heating or cooling costs. Fortunately, replacing faulty weatherstripping is a simple repair that doesn't require professional help. You can take off the old weatherstripping by loosening the staples with an screwdriver, or gently prying it off with a putty blade and then taking it off the door. Then, you can clean the area, and apply an additional layer of weatherstripping that is backed with foam seal. This will prevent leaks and increase comfort.

If your sliding patio doors aren't longer functioning as they should, it's important to take action immediately to prevent further damage and to keep them in good condition for the long term. Depending on the severity of the issue is, it's possible to choose a DIY solution or a professional repair/replacement could be the best option.

The majority of sliding patio door issues are caused by dirty rollers, faulty tracks, or an untidy handle. These issues can be addressed by regular cleaning and maintenance like changing the track's lubricant and adjust, and tightening the hardware. If these methods do not work then you should seek professional advice in order to ensure that your patio is working exactly as it should. Before you decide to replace or repair your patio door, make sure to check its warranty information to ensure that it is covered by the manufacturer's warranty. This can save you money on repairs or replacements in the near future.