Why We Why We Window Repair (And You Should Too!)

Window Repairs

Window repairs can help homeowners save money and make their homes comfortable. In the event of severe damage, such as broken glass or a cracked frame, a replacement window may be required.

But there are many other issues that can be addressed to extend the lifespan of your windows. Common problems include:

Cracked or Broken Panes

If it's an unintentional rock thrown by your lawnmower or a tree branch that has been blown by strong winds, cracked window glass isn't just visually unappealing, but also can result in higher electric bills since the broken pieces let cold air into your home. It's fairly simple to repair windows with damaged panes.

Begin by carefully removing the glass using gloves and safety glasses. You may have to use a utility knife to remove any remaining putty or old glazing compound around the edges of the frame. Then, use a soft paper towel or cloth to clean the surface of the glass and the frame's wood.

Once the area is clean, apply a waterproof silicone caulking around the perimeter of the frame. This prevents water from getting into the crack, which can cause further damage to both the frame and the glass.

A crack that is severe in double-paned glass can compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is so extensive that it is threatening the structural integrity of the window, or if the pane inside is not there, you may need to contact a professional.

Cracks caused by thermal stress can occur when there's an extreme difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If the cracks are on two sides of a window it is best to replace it rather than attempt to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready to be replaced. It will also keep out bugs and cold wind. You can cut a nylon stocking large enough to cover the entire crack, and then attach it using duct tape. It's not an indefinite solution, but it's a good way to keep insects out and cold air away from your home. If you notice cracks or blemishes on your windows that are older, you should check with your local business to determine whether replacing the entire window is the best option.

Rotten Wood

Wood rot is among the most common problems with windows. It can ruin a house's appearance and pose a safety risk. It is, however, possible to repair rotted wood. It is first necessary to determine the root of the wood's rot. Check for roof leaks and other areas where water can enter the wood.

You'll then have to remove the rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. Once the rotten areas have been eliminated then you must replace them with new wood. It is recommended to make use of pre-treated wood for this task as it will be resistant to decay. If you cannot replace the timber that has rotted then you can use wood filler and hardener to strengthen the damaged area. This kind of product can be found in a lot of hardware stores. Follow the instructions on the label of the product to achieve the most efficient results.

After you have replaced the rotten areas of the windowsill, it's important to protect the repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is a good choice for this task.

You can also use a two-part epoxy filler to shield the wood from further damage. It is easy to apply and leaves a nice finish. It is important to follow the directions on the label. After the epoxy filler is dry, you can sand the wood's surface. Start with a rough sandpaper, then move to a smoother grade.

The most important thing you don't want to do is make the area that has been damaged by expose it to more water. Therefore, it is recommended to cover the repaired area with an oil-based primer which will protect it from moisture. Then, you can apply the wood sealant, which is waterproof.

The website won't work

The reason a window won't open can be the result of a variety of reasons. The house could have settled, or the wood frames might have warped due to wet weather. Somebody may have put them in place to protect themselves. With a little patience and the right tools, you can open most stuck windows.

One of the most frequent reasons for windows that won't open is accumulated gunk or debris on its moving parts. Acme Glass notes that dirt and grime builds up over time on hinges, sliding tracks, and locks. In addition, metal hardware may be rusty when it comes in contact with humidity and direct sunlight. Spraying grease on these areas to aid in preventing oxidation and help keep your windows operating well.

The pulleys that raise or lower the window could be loosened, or break. These parts can lose tension and become obstructed when they are situated two or more floors above the ground.

If you have trouble opening a door, you can use a pry-bar to gently push the window open. Place a block of wood on the frame to give the pry bar more leverage, and be sure not to harm the upvc window repairs near me or the wood. Alternately, you can run a hair dryer around the edges of the frame for several minutes to warm the wood and help it move more easily.

A broken spring could be the cause of windows that don't raise or lower. You will need to consult your owner's guide for more details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they still won’t open, then it may be time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let your windows slip from functional to inoperable because windows that aren't properly closed can expose your home to burglary and water damage. Contact our team to learn more about our windows replacement services and products today!