The Best Advice You'll Ever Receive About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. However, if you have double-pane windows that are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to try to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is significant, you may prefer security screens that has a window repair. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for an appropriate fit. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you aren't able to move the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it can be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and then perform an experiment fit. The corner joints of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and that the sill pan is angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens with a breeze. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like all mechanical parts, hinges can wear out over time. It is an easy process but it can be simpler with someone else to assist in holding the frame up.

Verify that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to offer advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this causes a gap to form where the sash joins the frame. They can be repaired by giving them good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it may be feasible to give them a clean but in some cases it might be necessary to have them replaced.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through the gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your Upvc window it is recommended to speak with a professional immediately.