You'll Never Guess This Pellet Stove Furnace's Benefits

Pellet Stove Furnace

Pellet stoves can be used as a supplemental heating source or, with proper venting, a primary heating option. They are available as freestanding models as well as fireplace inserts. They can give the appearance of a traditional wood-burning fire.

The auger transports pellets from the hopper to the combustion chamber where they are burned and produce heat. Sensors monitor the flame and can adjust the speed of operation in order to maintain a desired temperature in the room.

1. Energy Efficiency

pellet stoves best stoves burn renewable non-toxic fuel composed of compressed sawdust, bark, wood chips, and other materials normally placed in landfills but which can be repurposed into a sustainable and clean source of heating. They can help homeowners cut down on their energy usage, and thus greenhouse gas emissions. Many pellet stove owners have reported that they've recouped their initial investment in only several years with lower heating costs.

Pellets are extremely compressed and more dense than natural wood, making them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. They are also stored in plastic bags to seal out moisture and need less frequent cleaning.

Like other heating systems pellet stoves should be properly size and vented. A qualified technician can assess your space and venting requirements to ensure the most efficient results.

In the process of installation, a hearth will be constructed according to your specifications and the vent is installed through an opening that is cut into the exterior of your home. The vent can be positioned through a sidewall or roof depending on your preference and the local laws.

Once the hearth and vent are finished and the stove is ready to be plugged in. Some manufacturers provide an electronic remote control that makes it simple to start and keep the fire burning, whereas other manufacturers offer additional sensors that monitor combustion and airflow flue temperatures, as well as pressure. If the system is able to determine that it needs more pellets or less, it signals to the auger that it needs to accelerate or slow down accordingly.

All stoves have an hopper for storage that can hold between 35 and 130 pounds of pellets until required. The size of the hopper will determine the frequency at which you have to refill your stove. Larger hoppers can be used for longer periods before a refill is needed. A grille pulls fresh air from the room and passes it over a heat exchanger, which then blows heated air into the living area by convection. A grate, auger or another device distributes the pellets and a pan beneath collects any unburned ones as well as the combustion residue.

Pellet stoves are more energy-efficient than wood-burning models, but aren't as efficient as natural gas or electric furnaces. Electric components that drive motorized parts of stoves require electricity. This could be a problem in a power failure, although backup systems like generators and batteries are readily available.

2. Low Maintenance

Pellet stoves can be extremely efficient, but they need some attention to operate properly. Cleaning your stove and exhaust vent on a regular basis will stop the accumulation of harmful creosote, which can cause a fire or explosion that could damage the stove and/or your home.

A pellet stove burns natural wood particles or other materials (like nutshells, corn kernels or small pieces of scrap wood). An auger powered by electricity is used to feed the fuel pellets from a tank into the burner, and into the combustion chamber. The speed at which pellets are pumped into the burner is controlled by the thermostat you set. The fire can continue to roar or reduced or even snuffed out depending on the temperature you set. The ash will be disposed in an empty ash tin underneath the burner. This can easily be removed and then disposed.

Pellets are made from byproducts that could have been discarded in the process of processing lumber. They are a renewable resource and emit significantly less particles into the air than traditional wood and pellet stove-burning stoves which results in a clean burning heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals produced by pellet stoves is also significantly lower than that of modern EPA-certified wood stoves.

They are not required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they can be vented through a wall or any other exterior structure. Pellet stoves are equipped with flue ports at the rear or top of the appliance. They are connected to a ventpipe that extends outside the home.

One disadvantage of pellet stoves is that you have to purchase or store enough pellets to last the winter time. Pellet stove owners typically consume three tons of wood pellets each winter, which is a cost of $200 per ton. The cost can be high, but they are cheaper than purchasing firewood and transporting it to a fireplace or wood-burning stove. Make sure that you purchase enough pellets to ensure that your stove will work through the coldest winter months, and that you have the right location to store them (preferably dry, cool and away from the ground).

3. Reduced Carbon Footprint

Pellet stoves generate heat using renewable biomass fuels, reducing the need for finite fossil fuels. This helps reduce the carbon footprint as well as helping diversify the energy sources used in homes.

Even the most modern woodstoves that are EPA certified emit significantly less than pellet stoves. The emissions from pellet stoves also are considerably lower than ones from gas furnaces. Pellets can be made of sawdust and bark as well as other lumber fragments. They may also contain soybeans, corn, or agricultural waste. When they are burned, they release less particulates (leading to respiratory problems and allergies), carcinogens, carbon monoxide, and the nitrous oxides.

The feed system is the primary difference between a pellet stove and a wood stove. Pellet stoves come with hoppers that contain the pellets. When the thermostat or sensors indicate that the room is in need of heating, the furnace turns and the pellets are fed into the combustion chamber where they burn and produce heat. The air that is released from the combustion chamber moves through a heat exchanger that transmits the heat to the blower and then out into the room. This process results in low emissions and no creosote buildup.

After the hopper has been emptied, the ash is removed using a cyclone and is deposited in an ash bin. The stove also contains fans to circulate the warm, clean air throughout the living area. Most pellet stoves are made to run with minimal maintenance and have a large viewing space for you and your family to take in the flames.

The most significant aspect that affects pellet stove emissions is the quality of the pellets. Poor-quality pellets will produce more emissions. When selecting your pellets, ensure that they're certified to meet certain standards and don't contain other ingredients, such as petroleum-based or urea-based substances. Also look for a company who offers a warranty and will repair or replace any part in the event of a problem. If you're looking for an even greener approach certain states allow homeowners to claim a tax credit for installing pellet stoves. This is a great opportunity to help reduce the initial cost of this type of stove and make it more affordable to set up.

4. Reduced Noise

pellet stove clearance sale stoves produce very little smoke or exhaust compared to fireplaces with wood burning. A fan is used to spread heat more evenly across the room. This feature is one of the reasons that pellet stoves require less maintenance than traditional wood stoves. While wood stoves must be regularly cleaned of dust and chemicals pellet stoves need the use of a special metal vacuum cleaner for routine cleaning.

Many manufacturers have designed their stoves so that they are simple to set up, operate and maintain. Their appliances come in a variety of styles that are designed to match the interior decor of your home. Some models come with programmable thermostats, remote control and WIFI applications that allow you to manage and monitor your stove from any location in the world.

The majority of pellet stoves come with an enormous fuel hopper, which can hold 35 to 130 pounds of pellets. The pellets are then fed into the combustion chamber via an auger. The output of heat and how hot the fire is will depend on the speed at which the pellets are fed to the burner. The hopper can be filled with hardwood pellets (from dense wood species such as oak and hickory) or softwood pellets (from pine and fir). Some stoves will even make use of alternative biomass pellets like those made from corn or switchgrass that can be an environmentally friendly option.

Pellet stoves emit less smoke and require less maintenance because they use less polluting fuel than wood-burning fireplaces. They also don't require a chimney, which makes them a more appropriate choice for new construction or retrofits.

Pellet stoves do not require regular cleaning of creosote or other chemicals similar to wood stoves. They just require periodic inspections to ensure proper operation and maintenance. Based on the model, this might include regular inspections and cleaning of the accumulation of the ash or "clinker," as well as the motor and fans. Your appliance dealer will be able to provide the proper procedures for your brand and model. He can also assist you to identify the right fuel for your stove, and give information on storage and safety.